Type CW Clipped Washer

Type CW - Clipped Washers are used to adjust the Lindapter clamps to meet different flange thicknesses.

LCW037 - 3/8" "CW" Clipped Washer - $1.07

Enlarge

3/8" "CW" Clipped Washer is used with Types A, AH, B and BR to adjust the height of the clamp to meet different beam flange thicknesses. The Type CW fits on the bolt between the clamp and the location plate. electro-galvanized finish Qty:

LCW050 - 1/2" "CW" Clipped Washer - $1.20

Enlarge

1/2" "CW" Clipped Washer is used with Types A, AH, B and BR to adjust the height of the clamp to meet different beam flange thicknesses. The Type CW fits on the bolt between the clamp and the location plate. electro-galvanized finish Qty:

LCW062 - 5/8" "CW" Clipped Washer - $1.56

Enlarge

5/8" "CW" Clipped Washer is used with Types A, AH, B and BR to adjust the height of the clamp to meet different beam flange thicknesses. The Type CW fits on the bolt between the clamp and the location plate. electro-galvanized finish Qty:

LCW075 - 3/4" "CW" Clipped Washer - $2.40

Enlarge

3/4" "CW" Clipped Washer is used with Types A, AH, B and BR to adjust the height of the clamp to meet different beam flange thicknesses. The Type CW fits on the bolt between the clamp and the location plate. electro-galvanized finish Qty:

LCW100 - 1" "CW" Clipped Washer - $4.57

Enlarge

1" "CW" Clipped Washer is used with Types A, AH, B and BR to adjust the height of the clamp to meet different beam flange thicknesses. The Type CW fits on the bolt between the clamp and the location plate. electro-galvanized finish Qty:

LCWM30 - M30 "CW" Clipped Washer - $5.23

Enlarge

M30 "CW" Clipped Washer is used with Types A, AH, B and BR to adjust the height of the clamp to meet different beam flange thicknesses. The Type CW fits on the bolt between the clamp and the location plate. electro-galvanized finish Qty:

Displaying 1-6 of 6